Operation; Wheel Blocking - lopital Tango Mode D'emploi

Step 3
The Tango / Tango XL must be put on the brakes before transferring persons
(See paragraph 3.1. Wheel blocking).
Step 4
The client can take a seat in the chair . Support the client if necessary .
Step 5
Place both feet on the footrests (See paragraph 3.2. Foot supports) .
Step 6
Close the armrests once the client has taken a seat in the chair
(See paragraph 3.3. Armrests) .
Step 7
Notify the client about the processes you will be carrying out .
Step 8
Take the chair off the brake when you wish to move it
(See paragraph 3.1. Wheel blocking).

3. Operation

3.1. Wheel blocking

• The brake can be applied on the Tango / Tango XL by
pushing the blue lip (1) on the wheel downwards
(See figure 1) .
• In order to take the Tango / Tango XL off the brake, the
same lip on the wheel must be moved upwards by tapping
the upper side of the lip (2) (See figure 1) .
Option: Directional wheel left front
(article number: 7556 0025) .
22 | Instructions for use | Tango & Tango XL Shower-toilet chair
2
Figure 1 Swivel wheel .
1