Lenze ECSDS Série Instructions De Montage page 104

5 Electrical installation
Power terminals
(
Stop!
No device protection if the mains voltage is too high
The mains input is not internally fused.
Possible consequences:
ƒ
Protective measures:
ƒ
ƒ
All power connections are plug connections and coded. The ECSZA000X0B
ƒ
plug connector set must be ordered separately.
Installation of the cables to EN 60204−1.
ƒ
The cables used must comply with the approvals required at the site of
ƒ
use (e.g. VDE, UL, etc.).
Assignment of the plug connectors
Plug
connector/termi
nal
X23
X23/+UG
X23/+UG
X23/−UG
X23/−UG
X23/PE
X23/PE
X24
X24/U
X24/V
X24/W
X24/PE
X25
X25/BD1
X25/BD2
104
Destruction of the device if the mains voltage is too high.
Observe the maximally permissible mains voltage.
Fuse the device correctly on the supply side against mains
fluctuations and voltage peaks.
Function
DC−bus voltage connection
Positive DC−bus voltage
Negative DC−bus voltage
Earth connection
Motor connection
Motor phase U
Motor phase V
Motor phase W
Earth connection
Motor holding brake connection
Brake connection +
Brake connection −
Electrical data
Dependent on application and
type
0 ... 770 V
2 ... 24.5 A (
Dependent on application and
type
0 ... 480 V
1.6 ... 20 A (
23 ... 30 V DC,
max. 1.5 A
l
^
93)
^
93)
EDKCSDX064 DE/EN/FR 3.0