GUTMANN Campo Série Notice De Montage page 27

Make the electrical connection. (Extraction
mode) When using an external blower
motor, connect the connecting cable.
11. Determine measurement (X-Y), X =
distance between hob and ceiling, Y =
distance between hob and hood.
12. Lift up the extractor hood and push it into
the upper tower, so that the prepared oblong
holes align with the fastening holes in the
module.
13. Fasten the cooker hood to the upper tower
(using the enclosed 5 M5 screws).
14. By removing the adhesive tape, loosen
the lower tower and pull down until it is
positioned on the hood.
15. For the version with recirculating air: Fas-
ten the deflector element with sheet metal
holders and blow-out grille to the upper tower.
Fasten the exhaust air hose between the
deflection element and the module using a
hose clamp
Recirculating air tower for island hoods
Recirculating air model for wall-mounted hoods
16. For carbon air filters, observe the
separate operating instructions.
en
27