ADEUNIS sigfox RC1 Pulse Guide Utilisateur page 79

sigfox RC1 Pulse - Guide utilisateur / User guide version V2.0.2
S323 4 Current value of meter -
channel A
S324 4 Current value of meter -
channel B
S325 2 Flow calculation period
(channels A and B)
S326 2 Flow threshold (channel A)
S327 2 Flow threshold (channel B)
S328 2 Leak threshold (channel A)
S329 2 Leak threshold (channel B)
S330 2 Number of daily periods
under the leak threshold
(channel A)
S331 2 Number of daily periods
under the leak threshold
(channel B)
S332 1 Scan period for Channel A
tamper input
S333 1 Tamper detection threshold
channel A
S334 1 Scan period for Channel B
tamper input
S335 1 Tamper detection threshold
channel B
Decimal Default value: 0
Min/max : 0 to (2
Unit : number of pulses
In COMMAND mode, it is possible to write a new value in this
register (for example an initialization value, an adjustment
value ...).
Decimal Default value: 0
Min/max : 0 to (2
Unit : number of pulses
In COMMAND mode, it is possible to write a new value in this
register (for example an initialization value, an adjustment
value ...).
Decimal Default value: 60
Min/max : 1 to 1440
Unit :
x 1min if S306=1
x 20s if S306=2
Decimal Default value :0 (deactivated)
Min/max : 0 to 65535
Unit: pulses per hour
Decimal Default value :0 (deactivated)
Min/max : 0 to 65535
Unit: pulses per hour
Decimal Default value: 0
Min/max : 0 to 65535
Unit : pulses per hour
Decimal Default value: 0
Min/max : 0 to 65535
Unit : pulses per hour
Decimal Default value: 0 (deactivated)
Min/max : 0 to 1440
Unit : none
The multiplication of this register by the period of flow mea-
surement must be less than 24 hours otherwise the product
will be perpetually in alarm.
Decimal Default value: 0 (deactivated)
Min/max : 0 to 1440
Unit : none
The multiplication of this register by the period of flow mea-
surement must be less than 24 hours otherwise the product
will be perpetually in alarm.
Decimal Default: 2
Min/Max: 1 to 255
Unit: x10 seconds
Decimal Default: 3
Min/Max: 1 to 255
Unit: none
Number of positive scans of A-channel tamper before trigger-
ing the tamper alarm
Decimal Default: 2
Min/Max: 1 to 255
Unit: x10 seconds
Decimal Default: 3
Min/Max: 1 to 255
Unit: none
Number of positive scans of B-channel tamper before trigger-
ing the tamper alarm
)
32-1
)
32-1
EN
Page 79 of 104