Displaying The Menu Screen; Setting Screen - JVC KW-V50BT Mode D'emploi

SETTINGS
U p d t a n i g h t e s s y e t m
❏
You can update the system by connecting a USB
device containing an update le.
• To update the system, visit <http://www.jvc.net/
cs/car/>.
1
Create an update le, copy it to a USB
device, and connect it to the unit.
2
Display the <System Information>
screen.
On the Home screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
3
<Application Updates the system
Version>
application.
<System Version> Updates the system.
<Bluetooth
Updates the Bluetooth
Version>
application.
It may take a while.
If the update has been completed successfully,
"Update Completed" appears. Reset the unit.
• To nish the procedure, press [
• If the update has failed, turn the power o and
then on, and retry the update.
• Even if you have turned o the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
S e t t n i g m e n u i e t m s
❏ Displaying the <Setup> menu screen
❏ <Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
• F6 to R6 (Initial: 0)
]. – When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
• L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [
– To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
• Flat (Initial)/Natural/Dynamic/Vocal Boost/Bass
Boost/Vibrant/User
<Loudness>
You can activate/deactivate loudness.
• On (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level.
• O : Cancels.
<Crossover>
<Volume Adjust>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/DVD-VR/
VCD, CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.)
The volume level will automatically increase or
decrease when you change the source.
• –15 to +6 (Initial: 00)
< S p e a k r e S l e
Select the size of the connected speaker.
• Standard (Initial)/Narrow/Middle/Wide
] to adjust.
c e > t
ENGLISH 49