Siriusxm® Radio (Only For Kw-V50Bt Region 1/ Kw-V30Bt Region 1); Presetting Channels - JVC KW-V50BT Mode D'emploi

SiriusXM® RADIO
Selecting a channel
1
Display the <Channel List> screen.
2
Select a category (1), and then select a
channel (2).
• You can change the page to display more
items by pressing [J]/[K].
• You can also select a channel directly from the
remote controller. (Page 52)
– Press DIRECT while holding SHIFT, enter a
channel number while holding SHIFT, then press
ENT.
28

Presetting channels

❏ Storing channels in the memory
You can preset 6 channels for each band.
1
Tune in to a channel you want to preset.
(Page 27)
2
Select a preset number.
The channel selected in step 1 is stored.
❏ Selecting a preset station
SiriusXM Replay™
You can pause, rewind and replay content from the
currently tuned channel.
• The SiriusXM Connect Vehicle Tuner continually
buffers up to 60 minutes of audio.
• If you change to another channel during playback,
the Replay buffer content will be lost.
❏ Entering the Replay mode
(Hold)
1
1 Progress bar
Shows the remaining capacity (gray) and the
amount of buffered content (blue). If the Replay
buffer is full, the entire bar is indicated in blue.
• Updated every second.
2 Time code
Shows you the point in the Replay buffer you are
listening to.
• Example: –5:00
– You are listening to audio that is 5 minutes
behind the current broadcast.
• Updated every second.
3 Playback status (I: play / W: pause/
O: rewind / N: fast forward)
2
3