Dust Collection - Dewalt 237-Os Manuel D'instructions

This sanding machine is designed to be operated with a remote
vacuum dust collection system or with the included dust bag.
Preparing Remote Vacuum Dust Collection Systems
To prepare the machine for remote vacuum dust collection systems
that have a 2" hose end, install 2" hose end (Figure 5 - "A") directly over
the exhaust tube (Figure 5 - "B").
To prepare the machine for remote vacuum dust collection systems that
have a 1 ½" hose end, follow this procedure:
1 Install the 2" x 1½" hose end adaptor (Part No. 30563A)
(Figure 5 - "C") over the exhaust tube (Figure 5 - "B").
2 Insert 1 ½" hose end (Figure 5 - "D") into the adaptor
(Figure 5 - "C").
NOTE: Start the remote vacuum collection system before operation.
Preparing to use the included dust bag
To prepare the machine for use with the included dust bag
(Part No: 53544C), follow this procedure:
1 Install the dust bag by pressing the end onto the exhaust tube
until the ring locks into the groove (Figure 6).
2 To remove the dust bag from the exhaust tube, pry up the end
of the bag opening to partially release the internal rib from the
groove, then pull.
3 To empty the dust bag, unzip the disposal flap and force
contents out by inverting the bag.
NOTE: For best results, empty frequently. Follow all warnings posted in
this manual and on the dust bag.
WARNING:
Never leave sanding dust unattended!
DANGER:
Dust generated from sanding wood floors can spontaneously ignite
or explode. Promptly dispose of any sanding dust in a metal
container clear of any combustibles. Do not dispose in a fire.

DUST COLLECTION

1.5" Hose From
Vacuum System
(Not Included)
A
2" Hose From
Vacuum System
(Not Included)
Figure 5
9
D
B
Exhaust Tube
(Part # 30563A)
2" Tube x 1.5"
Hose Adapter
(Not Included)
Install the dust bag by pressing
the end onto the exhaust tube
until the ring locks into the grove.
ENGLISH
C
Figure 6