Troubleshooting - Bosch MUZ9GM1 Manuel D'utilisation

en Troubleshooting

Troubleshooting

8 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting our after-sales service. This will avoid unne-
cessary costs.
Fault
The grain mill is not
working.
The grinding result is
not how you want.
16
Cause and troubleshooting
The grain mill is not assembled correctly.
Check whether the grain mill has been assembled
▶
correctly.
→ "Assembling the accessory", Page 14
An installed predetermined breaking point protects the
drive from damage. The agitator paddle on the under-
side of the housing will break at the predetermined
breaking point if there are foreign objects in the
grinder or if damp grain is ground.
To replace the agitator paddle, re-order from cus-
▶
tomer service quoting order number 10018359.
The setting ring is not set to the grinding level re-
quired.
Set the grinding level required by turning the setting
▶
ring.
→ "Grinding grain", Page 14