Troubleshooting - Bosch MAS9 Série Mode D'emploi

en

Troubleshooting

Troubleshooting
Only MAS95..:
Problem
Appliance switches off (in continu-
ous mode) and lamp in the cheese
button flashes quickly.
One of the ON buttons cannot be
pressed.
For all other faults please consult our customer service.
Blade cover and blade scraper are available as spare parts from customer service.
14
MAS9xxxx_8001027218.indb 14
Reason
Not a fault, appliance stops
automatically after 11 minutes of
continuous operation (automatic
timer).
The appliance was overloaded,
e.g. excessively hard food was fed
in (overload protection).
Blade cover not attached.
Safety pin (Fig. 19a) on blade
cover broken off.
Remedy
Switch off the appliance, allow to
cool down (at least 30 minutes),
then switch on again.
Switch off the appliance, pull out
the mains plug, eliminate the
cause, switch on the appliance
again.
Attach blade cover.
Replace blade cover.
09.11.2015 14:30:45