Intended Use; Delivery Content - VOLTCRAFT 1666061 Mode D'emploi

3. Intended use

The UV-500 UV meter allows precise measurement of radiant power of invisible ultraviolet radiation (UVA and UVB)
in the range of 0 to 20 mW/cm².
The UV sensor is equipped with a cosine correction filter to determine high-precision readings.
The meter can be ppositioned so that the display is clearly visible with the rear clamp holder.
The meter is powered by a standard 9 V block battery. In addition, the meter can be operated via the DC socket with an
optional plug-in power supply. The power supply must provide a stabilised voltage of 9 V/DC. In power supply mode,
the internal battery is disabled.
The meter does not have ATEX protection. Do not operate it in potentially explosive atmospheres (Ex).
Do not operate the camera under adverse environmental conditions such as flammable gases, vapours or solvents.
Any use other than that described above is not permitted and may damage the product. Furthermore, there are dan-
gers such as short circuit, fire, electric shock etc.
The product must not be modified or reassembled!
Always observe the safety information in these instructions.
Using this product for any purposes other than those described above may damage the product and result in a short
circuit, fire or electric shock. The product must not be modified or reassembled!
Read the operating instructions carefully and keep them in a safe place for future reference.

4. Delivery content

• UV-500 UV meter
• 9 V block battery
• UV sensor with removable protective cap
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code. Follow the
instructions on the website.
17