Storage - Honda Power Products UMC425E Manuel De L'utilisateur

Proper storage preparation is essential for keeping your power head
trouble free and looking good. The following steps will help to keep rust
and corrosion from impairing your power head.
CAUTION:
• If the power head has been running, the engine will be very hot;
allow it to cool before proceeding.
• Place the power head on a level surface and make sure that the
engine switch is in the OFF position to be certain the engine will not
start accidentally.
1.Clean all exterior surfaces, touch up any damaged paint, and coat
other areas that may rust with a light film of oil.
2.Drain the fuel.
Gasoline is extremely flammable and explosive under certain
conditions. Do not smoke or allow flames or sparks in the area.
a. Be sure that the engine oil filler cap is tightened securely.
b. Remove the fuel tank cap and drain the fuel into the container by
tipping the engine toward the fuel filler neck.

11. STORAGE

ENGINE OIL FILLER CAP
FUEL FILLER NECK
FUEL TANK CAP
55