Honda Power Products UMC425E Manuel De L'utilisateur page 46

1.Engine oil change
CAUTION:
If the engine has been running, the engine, muffler and the engine oil
are very hot and they remain hot for a while after stopping the engine.
To protect you from burn, wait until they cool down before starting the
oil change.
NOTE:
Drain the oil while the engine is still warm to assure rapid and complete
draining.
1.Check the fuel tank cap is tightened.
2.Remove the oil filler cap and drain the oil into the oil container by
tipping the engine toward the oil filler neck.
3.Refill with the recommended oil (see page 20) and check the oil level
(see page 19).
4.Reinstall the oil filler cap securely.
ENGINE OIL CAPACITY
UMC425E, UMC425U: 0.08 L (0.08 US qt, 0.07 lmp qt)
UMC435E, UMC435U: 0.10 L (0.11 US qt, 0.09 lmp qt)
Wash your hands with soap and water after handling used oil.
OIL FILLER NECK
UPPER LIMIT
FUEL TANK CAP
ENGINE OIL
FILLER CAP
UPPER LIMIT
OIL FILLER
NECK
43