Honda Power Products UMC425E Manuel De L'utilisateur page 3

INTRODUCTION
Thank you for purchasing a Honda power head.
Honda power heads UMC425E, UMC435E, UMC425U, and UMC435U
can be used by attaching different kinds of Honda approved
attachments to enable various operations.
This manual covers the operation and maintenance of the Honda power
head UMC425E UMC435E UMC425U UMC435U.
Honda Motor Co., Ltd. reserves the right to make changes at any time
without notice and without incurring any obligation.
No part of this publication may be reproduced without written
permission.
This manual should be considered a permanent part of the power head
and should remain with it if it is resold.
Pay special attention to statements preceded by the following words;
Indicates a strong possibility of severe personal injury or
death if instructions are not followed.
CAUTION: Indicates a possibility of personal injury or equipment
damage if instructions are not followed.
NOTE: Gives helpful information.
If a problem should arise, or if you have any questions about the power
head, consult an authorized Honda dealer.
Honda power heads are designed to give safe and dependable service if
operated according to instructions.
Operating a power head requires special effort to ensure the safety of
the operator and the safety of others. Read and understand this
Owner's Manual before operating the power head; failure to do so
could result in personal injury or equipment damage.
The illustrations herein are mainly based on: UMC435E
• The illustrations may vary according to the type.