Bosch WEU PSE 180 E Notice Originale page 13

OBJ_BUCH-746-002.book Page 13 Tuesday, June 19, 2012 9:26 AM
Wide application tools are for large-scale revomal; narrow ap-
plication tools are for spot-removal (especially at hard to
reach locations).
Carbide (TC) application tools provide longer service life than
steel application tools.
Cutter
Blades are mainly suitable for scraping applications on hard
surfaces (e.g. concrete). Soft surfaces (e.g. wood) can easily
be damaged when working with extra-sharp blades.
Possible Applications:
– Removing of carpet adhesive, carpet foam or hard foam re-
mainders, plaster, gypsum and mortar remainders, as well
as putty and grout
– Evening out or levelling irregularities (e.g. adhesive on
screed)
– Loosening of flooring (e.g. carpet, PVC, cork)
SM 60 CS (2 608 691 027)
Steel, 60 mm width, extra-sharp
SM 60 HMS (2 608 691 012)
Carbide, 60 mm width, extra-sharp
SM 40 HMS (2 608 691 013)
Carbide, 40 mm, narrow, extra-sharp
SM 20 HMS (2 608 691 062)
Carbide, 20 mm, narrow, extra-sharp
e.g. for working in tight, narrow locations or in
corners
The following blades are suitable for sraping off materials that
are easily removed, such as remainders of adhesive or paint,
even from soft surfaces (e.g. wood, aluminium).
SM 60 HM (2 608 691 014)
Carbide, 60 mm width
SM 40 HM (2 608 691 015)
Carbide, 40 mm, narrow
Spatulas
Due to their resilience, spatuals are suitable for work on soft
and sensible surfaces (e.g. wood, plastic, glass).
Possible Applications:
– Removing of paint remainders, silicone, gypsum and rough
cast on glass and plastic sheets
– Smoothing out and removing of adhesive and seal remain-
ders on parquet flooring
SP 100 C (2 608 691 102)
Steel, 100 mm width, straight
SP 80 C (2 608 691 100)
Steel, 80 mm width, straight
Bosch Power Tools
SP 60 C (2 608 691 019)
Steel, 60 mm width, short
SP 60 CR (2 608 691 064)
Steel, 60 mm width, half-round
e.g. for cleaning concave surfaces such as scaf-
folding tubes, shovels, boilers
SP 40 C (2 608 691 022)
Steel, 40 mm, narrow, long
e.g. for removing putty remainders in niched ar-
eas
Wood Chisels
Wood chisels are suitable for carving applications, but only in
short-fibred softwood (e.g. limewood, poplar).
SB 15 CF (2 608 691 016)
Steel, 15 mm cutting edge, flat
SB 18 CW (2 608 691 066)
Steel, sloped/wide, 18 mm cutting edge, flat
SB 8 CW (2 608 691 067)
Steel, sloped/narrow, 8 mm cutting edge, flat
SB 14 CR (2 608 691 017)
Steel, straight/wide, 14 mm cutting edge, half-
round
SB 7 CR (2 608 691 068)
Steel, straight/narrow, 7 mm cutting edge, half-
round
SB 14 CRK (2 608 691 069)
Steel, offset/wide, 14 mm cutting edge, half-
round
SB 13 CV (2 608 691 018)
Steel, straight, 13 mm cutting edge, V-shaped
SB 13 CVK (2 608 691 070)
Steel, offset, 13 mm cutting edge, V-shaped
SB 15 C (2 608 691 065)
Steel, blank, 15 mm cutting edge, flat
Blank, for grinding your own form and contour
English | 13
2 609 932 850 | (19.6.12)