Intended Use; General Safety Rules - Homelite HLT26CDB Manuel D'utilisation

For technical review, sent 3 Dec 2013.
Than ou for u ing a Homelite trimmer.
Your new trimmer has been engineered and manu
factured to Homelite's high standard for dependability,
ease of operation, and operator safety. Properly cared for,
it will give you years of rugged, trouble-free performance.

INTENDED USE

This product is only intended for use outdoors in a well
ventilated area.
The product is intended for cutting long grass, weed and
similar vegetation at or about ground level. The cutting
plane should be approximately parallel to the ground
surface. The product should not be used to cut or trim
hedges, bushes or other vegetation where the cutting
plane is not parallel to the ground surface.
WARNING
To reduce the risk of injury, the user must read
and understand the operator's manual.
WARNING
Do not attempt to operate this trimmer until you
have read thoroughly and understood completely
all instructions, safety rules etc contained in
this manual. Failure to comply may result in
accidents involving fire, electric shock or serious
personal injury. Save operator's manual and
review frequently for continuing safe operation,
and instructing others who may use this tool.
READ ALL INSTRUCTIONS.

GENERAL SAFETY RULES

Do not allow children or untrained individuals to use
this unit.
Never start or run the engine in a closed or poorly
ventilated area; breathing exhaust fumes can kill.
Clear the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire,
or string which can be thrown or become entangled in
the bump head.
Wear full eye and hearing protection while operating
this unit.
Wear heavy long trousers, boots, and gloves. Do not
wear loose fitting clothing, shorts, jewellery of any
kind, or use with bare feet.
Secure long hair so it is above shoulder level to
prevent entanglement in any moving parts.
Keep all bystanders, children, and pets at least 15 m
away.
Do not operate this unit when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
Do not operate in poor lighting.
English (Original instructions)
SPECIFIC SAFETY RULES FOR TRIMMER USE
11
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure
to hot surfaces.
Keep all parts of your body away from any moving part.
Do not touch area around the silencer and engine of
the trimmer, these parts get hot from operation.
Always stop the engine and remove the spark plug
wire before making any adjustments or repairs except
for carburetor adjustments.
Inspect the unit before each use for loose fasteners, fuel
leaks, etc. Replace any damaged parts before use.
It has been reported that vibrations from hand-held
tools may contribute to a condition called Raynaud's
Syndrome in certain individuals. Symptoms may
include tingling, numbness and blanching of the fingers,
usually apparent upon exposure to cold. Hereditary
factors, exposure to cold and dampness, diet, smoking
and work practices are all thought to contribute to the
development of these symptoms.
There are measures that can be taken by the operator
to possibly reduce the effects of vibration:
a) Keep your body warm in cold weather. When
operating the unit wear gloves to keep the hands
and wrists warm. It is reported that cold weather is
a major factor contributing to Raynaud's Syndrome.
b) After each period of operation, exercise to increase
blood circulation.
c) Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor
about these symptoms.
Keep the tool well maintained, fasteners tightened and
worn parts replaced.
Mix and store fuel in a container approved for fuel.
Mix fuel outdoors where there are no sparks or flames.
Wipe up any fuel spillage. Move 9 m away from
refueling site before starting engine.
Stop the engine and allow to cool before refueling,
performing adjustments or maintenance or storing the
unit.
Allow the engine to cool; empty the fuel tank and
secure the unit from moving before transporting in a
vehicle.
Replace bump head if cracked, chipped, or damaged
in anyway. Be sure the bump head is properly installed
and securely fastened. Failure to do so can cause
serious injury.
Make sure all guards, straps, deflectors and handles