Gaggenau RB 282 705 Manuel D'utilisation Et D'entretien page 8

en-us Installation and connection
Do not insert screws into decorative moldings, or
¡
similar.
Protect the surface of the front panels from damage
¡
during installation.
A Front panel overhang
B Lower edge of the front panel
Over-and-under and side-by-side installation
If you want to install 2 refrigerating appliances one over
the other or side by side, you must maintain a clearance of
at least 150 mm between the appliances. Selected
appliances can be installed without a minimum clearance.
Ask your dealer or kitchen planner about this.
4.3 Installing the appliance
Install the appliance in accordance with the enclosed
▶
installation instructions.
4.4 Preparing the appliance for first use
Remove the information material.
1.
Remove the protective film and transit bolts, e.g.
2.
remove the adhesive strips and cardboard.
Clean the appliance for the first time. → Page 17
3.
4.5 Connecting the appliance to the
electricity supply
Insert the power plug of the appliance's power cord in a
1.
socket outlet with grounding nearby.
The connection data of the appliance can be found on
the rating plate. → "Appliance", Fig.
Check the power plug is inserted properly.
2.
The appliance is now ready to use.
a
8
/ , Page 10
6
1