Identification Of Parts; Mounting Of The Handle - Texas Sp 50 Manuel D'utilisation

Identification of parts

A. Handle
B. Starting cord
C. Oil lid / Oil filling
D. Spark plug cap
E. Dischargeguard
F. Petrol filling
G. Air filter
H. Primer
I. Height adjustment
J. Grass catcher

Mounting of the handle

The lawn mower is supplied almost fully
assembled.
Remove the lawn mower from the box
and pull the top control in the direction of
the arrow.
Check that the cables do not become
trapped.
Once the control is unfolded, tighten the
two wing nuts (2).
Tighten the brackets (1) in the centre of
the control. Take care not to tighten the
innermost adjustment screw too much. If
this happens, it could damage the
bracket.
B
E
I
C
D
A
J
19
F
G
1
2