Scope Of Delivery; Intended Use; Safety Information - Dexter power TS8 Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Scope of delivery

• Saw blade guard
• Push stick
• Parallel stop
• Transverse stop
• Table width extension
• End pieces and screws for table width extension
• Assembly material
• Ring spanner, 19/10 mm
• Ring spanner, 7/8 mm
• Operating manual

4. Intended use

The circular table saw is used for the longitudinal and
transverse cutting (only with the transverse stop) of
all types of timbers and plastic, in accordance with
the machine size. It is not permitted to cut any type
of round timber.
The equipment is allowed to be used only for its pre-
scribed purpose. Any other use is deemed to be a
case of misuse. The user/operator and not the man-
ufacturer will be liable for any damage or injuries of
any kind resulting from such misuse.
The machine is to be operated only with suitable saw
blades. (HM or CV saw blades). The use of any type
of HSS saw blades and cutting discs is prohibited.
An element of the intended use is also the observance of
the safety instructions, as well as the assembly instruc-
tions and operating information in the operating manual.
Persons who operate and maintain the machine must
be familiar with the manual and must be informed
about potential dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
m IMPORTANT
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual
in a safe place, so that the information is available
at all times. If you give the equipment to any other
person, hand over these operating instructions and
safety regulations as well. We cannot accept any li-
ability for damage or accidents which arise due to
a failure to follow these instructions and the safety
instructions.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
26 | GB
Despite use as intended, specific risk factors cannot
be entirely eliminated. Due to the design and layout
of the machine, the following risks remain:
• Contact with the saw blade in the exposed sawing area
• Reaching into the running saw blade (cutting injury)
• Kick-back of workpieces and workpiece parts
• Saw blade breakage
• Ejection of faulty carbide parts of the saw blade
• Hearing damage when the necessary hearing pro-
tection is not used
• Harmful emissions of wood dusts during use in en-
closed areas
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial appli-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.

5. Safety information

General power tool safety warnings
m WARNING: Read all safety warnings, instruc-
tions, illustrations and technical data provided
with this power tool. Failure to follow the warnings
and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future refer-
ence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

691006126952897039013099533901309961

Table des Matières