Double Insulation For Safer Operation - Hitachi C 10FSHC Mode D'emploi

DOUBLE INSULATION FOR SAFER OPERATION

To ensure safer operation of this power tool, HITACHI has adopted a double insulation design.
"Double insulation" means that two physically separated insulation systems have been used to
insulate the electrically conductive materials connected to the power supply from the outer frame
handled by the operator. Therefore, either the symbol "
appear on the power tool or on the nameplate.
Although this system has no external grounding, you must still follow the normal electrical
safety precautions given in this Instruction Manual, including not using the power tool in wet
environments.
To keep the double insulation system eff ective, follow these precautions:
* Only HITACHI AUTHORIZED SERVICE CENTER should disassemble or assemble this power
tool, and only genuine HITACHI replacement parts should be installed.
* Clean the exterior of the power tool only with a soft cloth moistened with soapy water and dry
thoroughly.
* Never use solvents, gasoline or thinners on plastic components; otherwise the plastic may
dissolve.
SAVE THESE INSTRUCTIONS
MAKE THEM AVAILABLE TO
OWNERS OF THIS TOOL!
AND
OTHER USERS
AND
" or the words and "Double insulation"
English
9