General Technical Data; Technical Data Table; Instructions For Installation; Installation - Lotus PCI-94ET Instructions Pour L'installation Et Mode D'emploi

MODELS
DIMENSIONS cm
POWER SUPPLY
MAXIMUM ABSORPTION A
MAXIMUM POWER kW
POWER SUPPLY CABLE
The data plate is on the front (see diagram in electric connection item) and has all the data necessary for the connection.
When fitting, the appliance must be leveled using a spirit level; slight differences of level can be adjusted by screwing
or unscrewing the adjustable feet. The main switch or the socket must be near the appliance and easily accessible.
It is advisable to place the appliance under an extractor hood so that steam is extracted rapidly. If the appliance is placed
near walls, dividing panels, kitchen furniture, decorative finishes, etc., these should be in flameproof material; otherwise
it is necessary to cover them with non-flammable material.
Above all, it is necessary to ensure that fire prevention standards are observed.
Always comply with the following points during installation:
- Ensure that mains voltage complies with the voltage indicated on the specification table of the
appliance

GENERAL TECHNICAL DATA

Minimal pan diameter:
Relative humidity:
Operation Ambient temperature:
Voltage tolerance:
Supply frequency:

TECHNICAL DATA TABLE

PCI-94ET PCIT-94ET
40x90x90 40x90x29
400V/3
50/60Hz 50/60Hz
14,4 A
10 kW
4x1,5 mm² 4x1,5 mm²
MODELS
DIMENSIONS cm
POWER SUPPLY
MAXIMUM ABSORPTION A
MAXIMUM POWER kW
POWER SUPPLY CABLE

INSTRUCTIONS FOR INSTALLATION

INSTALLATION

GB IE
PCI-98ET PCIT-98ET
80x90x90
400V/3 400V/3
50/60Hz
14,4 A 29 A
10 kW 20 kW
4x4mm²
TPI-98ET
80x90x90
400V/3 50/60Hz
40,6 A (20,3 + 20,3)
28 kW
4x2,5mm² + 4x2,5mm² 4x2,5mm² + 4x2,5mm²
42
120 mm
10% to 90% non-condensing
0°C ÷ 40°C
-10% ÷ +6%
50 – 60 Hz
PCIW-94ET
80x90x29 40x90x90
400V/3 400V/3
50/60Hz 50/60Hz
29 A 7,2 A
20 kW 5 kW
4x4mm² 4x1,5 mm²
TPIT-98ET
80x90x29
400V/3 50/60Hz
40,6 A (20,3 + 20,3)
28 kW
PCIWT-94ET
40x90x29
400V/3 50/60Hz
7,2 A
5 kW
4x1,5 mm²