Declaration Of Compliance; Gas Technical Data Table; Electric Technical Data Table; Installation - Lotus TP-94G Instructions Pour L'installation Et L'emploi

Table des Matières

Les langues disponibles

The manufacturer declares that the appliances are compliant with the prescriptions of the EEC norm 2009/142 for the

gas part and with norm 2006/95/CE, 2004/108/CE for the electric part. The installation must be done observing the

norms in force particularly concerning room ventilation and discharging gas emissions.

N.B.: The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect

installation, alterations, maintenance or use of the appliance, as in all the other cases considered in the items of our sales

conditions.

DIMENS.

MODEL

TPF2-98G

80x90x90h

TP-94G

40x90x90h

80x90x90h

TP2-98G

TP4-912G

120x90x90h

80x90x90h

TPF2-98GE

TPFV2-98GE

80x90x90h

120x90x90h

TPF4-912GV

TPF4-912GEV

120x90x90h

TPF4-912G

120x90x90h

TPF4-912GE

TPFV4-912GEV

120x90x90h

40x90x29h

TPT-94G

TP2T-98G

80x90x29h

TP4T-912G

120x90x29h

MODEL

DIMENS. cm

TPF2-98GE

80x90x90h

TPF4-912GEV

120x90x90h

TPF4-912GE

TPFV2-98GE

80x90x29h

TPFV2-98GE

80x90x29h

TPFV4-912GEV

120x90x90h

TPFV4-912GEV

120x90x90h

•

The operations for installing, conversions for use with other types of gas and starting up must be done only by

qualified personnel whose qualifications comply with the norms in force.

•

Gas installations, the electrical connections and the rooms in which the appliances are installed must comply with

the norms in force in the Country in which the installation is carried out; above all, the appliance must be installed

in a well ventilated room, preferably under an extractor hood, so as to ensure the complete extraction of gas

emissions which are formed during combustion. The air necessary for combustion is 2m3 /h per kW of power

installed.

Attention! In accordance with international rules, when connecting the appliance, an automatic device enabling the

disconnection of all contacts from the mains, must be installed above it; this device must have a contacts opening of at

least 3 mm.

Ensure that the air outlets in the place of work are sufficient to guarantee the necessary air exchange, as stated in

paragraph 4.3 of the UNI-CIG. norm 8723.

The appliance may be installed as a single element or in series with other appliances of our production. It is necessary to

observe a minimum distance of 10 cm from the appliance to prevent contact with walls of inflammable material;

adequate measures must also be taken to ensure thermal insulation of inflammable parts, such as the installation of a