Bosch Coach smartRadio Mode D'emploi page 56

56 | en
Bluetooth® settings in the main menu of the smartRadio
1 Menu level
st
:
>SYSTEM
Specifying the Bluetooth® PIN code
You can specify an individual PIN code to be used for establishing a Bluetooth® connection.
f In the main menu of the smartRadio, select and confirm the ">SYSTEM" menu item.
f In the "SYSTEM" menu, select and confirm the ">BLUETOOTH" menu item.
f In the "BLUETOOTH" menu, select and confirm the ">PIN CODE" menu item.
The current PIN code is displayed.
f Press the button :/H or
necessary, several times).
f Press the MENU button 8/F.
f Repeat these two steps for each following number of the PIN code.
7 620 210 041/042 | 11.2017
2 Menu level 3
nd
:
>BLUETOOTH >BT ON/OFF
>AUTO CONNECT
>PIN CODE
>OBEX AUTHORI
button >/M to set the first number of the code (if
Bluetooth telephone functions
Menu level Function/Action
rd
Select and confirm to switch
Bluetooth® on/off
Select and confirm to switch
Bluetooth® Auto Connect on/off.
If Auto Connect is switched on,
an already paired Bluetooth
device will be connected
automatically if it comes into
range. For that, Bluetooth® has
to be switched on and no other
device is connected.
Specify an individual PIN code
for the Bluetooth® connection
(see below)
Select and confirm to switch
OBEX data transfer for tele-
phone book access on/off.
Accessing the telephone book of
the connected Android™
smartphone via OBEX requires
you to enter the OBEX passcode
("0000") on the smartphone.
Robert Bosch Car Multimedia GmbH