Miscellaneous - N&W Global Vending Koro Manuel D'utilisation, Installation Et Entretien

MISCELLANEOUS

This menu contains some sub-menus, used less fre-
quently, which permit control of the functions described
below.
TECH>
MISCELLANEOUS
Machine information
Installation date
This function is used to store the current date of system as
installation date.
The date is printed when retrieving the statistics.
Programming the MACHINE code
When the "Machine code" function is displayed the eight-
digit numeric code identifying the machine can be changed
(from the default 0).
Programming the operator code
When the "Operator code" function is displayed the six-
digit numeric code identifying groups of machines can be
changed (from the default 0).
Initialising
When the "Initialise" function is displayed the vending
machine can be initialised restoring all default data.
This function should be used if there is a memory data error
or when the software is replaced.
Except for the general electronic counter, all statistical
data is reset.
© by N&W GLOBAL VENDING SpA
TECH>
"List of functions"
25
Press confirm button " " and the display will indicate the
message "Confirm?". Press the confirm button " " again
and some parameters will be requested, which are:
"Country"
intended as type of base doses for the different selections
(e.g. IT coffee = 45 cc - FR coffee = 80 cc).
The available "countries" vary according to the models.
"Layout"
A number of Button/Selection combinations to choose
from is provided for each model and dose type (the
combinations available for each layout are indicated in the
dose selection table supplied with the machine).
"Tank"
Defining whether the water supply is:
ON
OFF
Equipped base cabinet - from the tank without sensor
When confirming the options the message "Working" is
displayed for a few seconds.
"Language"
When the machine is switched on for the first time or in any
case after initialising, as well as the list of controls to be
performed, also the language used for the messages on
the display is proposed.
The available languages can be scrolled with the " " and
" " buttons, and the selection is confirmed with button " ".
Unless the machine is initialised, the language request is
not made again.
- from the tank with level sensor
- from the mains
0603 265 - 00