Hot Surface Indicator; Daily Use; Ignition Of The Burner - Aeg Hvb8453Ib Notice D'utilisation

4.4 Hot Surface Indicator

WARNING!
If the cooking zone becomes hot during
cooking, the setting indicator shows a
Hot Surface warning
the zone is turned off. The Hot Surface
Indicator shows until the cooking zone
cools, the hob is unplugged or there is a
power cut.

5. DAILY USE

WARNING!
Refer to Safety chapters.
5.1 Burner overview
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
E. Pilot flame

5.2 Ignition of the burner

Always light the burner before you put on
the cookware.
14 ENGLISH
/ / when
WARNING!
Be very careful when you use open fire in
the kitchen environment. The
manufacturer declines any responsibility
in case of the flame misuse.
1. Press and hold
After 50 seconds of non-use, the hob
deactivates.
2. After light animation, when you see
display, press the desired heat setting on
the control bar.
If after some tries the burner does not
light, check if the crown and its cap are in
correct positions .
If during the normal use of the burner it
starts to spark and flame adjust
automatically, check if the metal part of
the ignition candle and the flame safety
device are clean (Refer to "Care and
cleaning").
If the burner accidentally goes out, the
hob re-ignite the burner 3 times. If the
flame still does not light,
to activate the hob.
appears.
on