Adjusting The Volume; Turning The Unit Off - Pioneer DEH-P9800BT Mode D'emploi

Section
Basic Operations
03
! There is sometimes a delay between starting
up CD playback and the sound being issued.
When being read, Format read is displayed.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting it again.
! When the CD loading or ejecting function
does not operate properly, you can eject the
CD by pressing and holding EJECT while
opening the front panel.
! If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 99.

Adjusting the volume

% Use MULTI-CONTROL to adjust the
sound level.
With the head unit, turn MULTI-CONTROL to
increase or decrease the volume.
With the remote control, press VOLUME to in-
crease or decrease the volume.

Turning the unit off

% Press SOURCE and hold until the unit
turns off.
18
En