Basic Operations; Power On/Off; Selecting A Source; Adjusting The Volume - Pioneer DEH-1120MP Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 58
Section
02
Operating this unit
! If a track number 100 or more is selected,
d on the left of the track number indica-
tor will light.
3 AF indicator
Appears when AF (alternative frequencies
search) function is on.
4 TP indicator
Appears when a TP station is tuned in.
5 TA indicator
Appears when TA (traffic announcement
standby) function is on.
6 MP3/WMA indicator
Shows the type of the currently playing disc.
7 RPT indicator
Shows when repeat play is turned on.
8 LOUD indicator
Appears when loudness is on.
9 5 (stereo) indicator
Appears when the selected frequency is
being broadcast in stereo.
a LOC indicator
Appears when local seek tuning is on.

Basic Operations

Power ON/OFF

Turning the unit on
% Press SOURCE to turn the unit on.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.

Selecting a source

You can select a source you want to listen to.
6
En
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources.
Tuner—Built-in CD player—AUX
Notes
! In the following cases, the sound source will
not change.
— When there is no disc in the unit.
— When AUX (auxiliary input) is set to off
(refer to page 13).
! AUX is set to on by default. Turn off the AUX
when not in use (refer to Switching the auxili-
ary setting on page 13).
! When this unit's blue/white lead is connected
to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.

Adjusting the volume

% Turn VOLUME to adjust the sound level.

Tuner

Listening to the radio

1
Press SOURCE to select the tuner.
2
Press BAND to select a band.
Press BAND until the desired band (F1, F2 for
FM or MW/LW) is displayed.
3
To perform manual tuning, briefly press
c or d.
4
To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Deh-1100mpbDeh-1100mp

Table des Matières