Setting The Clock; Switching The Warning Tone; Switching The Face Auto Open - Pioneer DEH-P9800BT Mode D'emploi

Masquer les pouces Voir aussi pour DEH-P9800BT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section
Initial Settings
16
3
Push MULTI-CONTROL up or down to
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.

Setting the clock

Use these instructions to set the clock.
1
Use MULTI-CONTROL to select Clock.
Clock appears in the display.
2
Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the clock display:
Hour—Minute
As you select segments of the clock display
the segment selected will blink.
3
Push MULTI-CONTROL up or down to
set the clock.
Pushing MULTI-CONTROL up will increase
the selected hour or minute. Pushing
MULTI-CONTROL down will decrease the se-
lected hour or minute.
Notes
! You can match the clock to a time signal by
pressing MULTI-CONTROL.
— If the minute is 00 to 29, the minutes are
rounded down. (e.g., 10:18 becomes
10:00.)
— If the minute is 30 to 59, the minutes are
rounded up. (e.g., 10:36 becomes 11:00.)
90
En
! Even when the sources are off, the clock dis-
play appears on the display. Pressing CLOCK
when the sources and feature demo are off,
turns the clock display on or off.

Switching the warning tone

If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone will sound. You
can turn off the warning tone.
1
Use MULTI-CONTROL to select
Warning tone.
Warning tone appears in the display.
2
Press MULTI-CONTROL to turn warning
tone on.
ON appears in the display.
# To turn warning tone off, press
MULTI-CONTROL again.

Switching the face auto open

For theft protection, the front panel opens
automatically and easily detaches. Face auto
open is on as a default.
1
Use MULTI-CONTROL to select
Face auto open.
Face auto open appears in the display.
2
Press MULTI-CONTROL to turn the face
auto open on.
ON appears in the display.
# To turn the face auto open off, press
MULTI-CONTROL again.

Publicité

Chapitres

Table des Matières
loading

Table des Matières