Bluetooth Telephone; Hands-Free Phoning With Cellular Phones - Pioneer DEH-P9800BT Mode D'emploi

Section

Bluetooth Telephone

07
Hands-free phoning with
cellular phones featuring
Bluetooth wireless technology
1 1 1 2 2 2 3 3 3 4 4 4
7 7 7
If your cellular phone features Bluetooth wire-
less technology, you can connect to this unit
for hands-free, wireless calls, even while driving.
Important
! Since this unit is on standby to connect with
your cellular phones via Bluetooth wireless
technology, using this unit without running
the engine can result in battery drainage.
! When phone is selected as a source, no audio
adjustments, except balance adjustment, are
possible.
1 Battery strength indicator
Shows the battery strength of cellular
phone.
! Battery strength indicator may differ
from the actual battery strength.
! If the battery strength is not available,
nothing is displayed in the battery
strength indicator area.
2 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from the
actual signal level.
! Depending on the cellular phones featur-
ing Bluetooth wireless technology, radio
field intensity is not available. In this
34
En
5 5 5 5
6 6 6
case, the signal level indicator does not
appear.
3 Automatic answering/Automatic reject-
ing indicator
Shows AUTO when the automatic answer-
ing function is on (for more details, refer to
Setting the automatic answering on page
50).
Shows REF when the automatic rejecting
function is on (for more details, refer to Set-
ting the automatic rejecting on page 50).
4 Incoming call notice indication
Shows when an incoming call has been re-
ceived and not checked yet.
5 Device name
Shows the device name of the cellular
phone.
6 Calendar display
Shows the date, and time.
7 User number indicator
Shows the registration number of the cellu-
lar phone.
Notes
! This unit's phone call reception is on standby
when ignition switch is set to ACC or ON.
! The line-of-sight distance between this unit
and your cellular phone must be 10 meters or
less for sending and receiving voice and data
via Bluetooth wireless technology. However,
the transmission distance may become short-
er than the estimated distance, depending on
the environment in use.
! In order to use Bluetooth wireless technology,
devices must be able to interpret certain pro-
files. This unit is compatible with the following
profiles.
— GAP (Generic Access Profile)
— SDP (Service Discovery Protocol)