Selecting A Track Directly In The Current Folder - Pioneer DEH-P9800BT Mode D'emploi

Section
MP3/WMA/AAC/WAV Player
06
! Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
! When playing back files recorded as VBR
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
! When playing back MP3 files recorded as VBR
(variable bit rate) files, the bit rate value is not
displayed even after switching to bit rate.
(VBR will be displayed.)
! When playing back WMA files recorded as
VBR (variable bit rate) files, the average bit
rate value is displayed.
! There is no sound on fast forward or reverse.
! When an MP3/WMA/AAC/WAV disc is in-
serted, folder name automatically begins to
scroll in the display. When Ever Scroll is set to
ON at the initial setting, folder name scrolls
continuously. About Ever Scroll, refer to
Switching the Ever Scroll on page 92.
Selecting a track directly in
the current folder
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
2 Press 0–9 buttons to enter the desired
track number.
# You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The track of entered number will play.
28
En
Note
After entering the number input mode, if you do
not perform an operation within about eight sec-
onds, the mode is automatically canceled.