Handsfree Calling; Making Calls - Sony MEX-BT5700U Mode D'emploi

Handsfree calling

Check that the unit and cellular phone are
connected beforehand.

Making calls

You can make a call from the connected cellular
phone by operating this unit.
You can call from the phonebook in a cellular
phone via this unit (page 28).
1
Press (SOURCE) repeatedly until
"Bluetooth Phone" appears.
2
Press (handsfree).
The CALL menu appears.
3
Rotate the control dial until the
desired menu item appears, then
press the select button.
Depending on the setting, by rotating the
control dial again, other items can be set.
Call menu
Phonebook* 1
Selects from the phonebook list in the unit
(page 29) (Maximum storable contacts: 300).
Recent Call* 1
Selects from the dialed / received call history.
(Maximum storable name and phone
numbers:20)
Select "Delete" to delete the name and phone
number, "Delete All" to clear the history.
Dial
Inputs the phone number using the control dial
or card remote commander.
Receive PB*
1 * 2 (Receive Phonebook)
Receives and stores the phonebook data from a
cellular phone (page 29).
Security
Locks the personal information by setting a
4-digit password.
If you set the security, "Security Code" appears
when the above menus are operated.
To unlock the security, input the password. You
can operate this unit without input password
until it is turned off.
*1 If "Security" is set, "Security Code" appears and
operation is not possible.
*2 If a character that cannot be displayed on this unit
is used, it is not displayed correctly.
Calling from the phonebook in the
unit
1 Rotate the control dial to select "Phonebook,"
then press the select button.
2 Select an initial from the initial list.
3 Select a name from the name list.
4 Select a phone number from the number list.
5 Select "Call."
Calling from the call history in this
unit
1 Rotate the control dial to select "Recent Call,"
then press the select button.
2 Select a name and number from the call
history.
3 Select "Call."
Note
You can call from the call history of this unit only.
Calling by phone number input
1 Rotate the control dial to select "Dial," then
press the select button.
2 Input the phone number using number buttons,
the control dial or card remote commander.
3 Select "Yes."
To input "+," press and hold the 0 button on the
card remote commander.
Calling by preset number
You must store a phone number to the Preset Dial
beforehand (page 30).
1 Press (1) - (6) with the "Bluetooth Phone"
source selected.
2 Select "Yes."
Presetting the volume of ring tone
and talker's voice
You can preset the volume level of the ring tone
and talker's voice.
To adjust the ring tone:
Rotate the control dial while the phone is ringing.
"Ring Volume" appears and ring tone volume is
set.
To adjust the talker's voice:
Rotate the control dial with the "Bluetooth
Phone" source selected. "Talk Volume" appears
and the talker's voice volume is set.
continue to next page t
27