Trouble Shooting And Remedy; Service Address - Ecolab Cerberus Mode D'emploi

9.4. Trouble Shooting and Remedy

Fault
Limited water supply
Insufficint or No foam creating.
In case of errors/troubles not mentioned above, please contact your local service technician for further assis-
tance.

9.5. Service address

Please see the back cover of this manual
18
Cause
Insufficient or No water supply.
Is the filter if any clogged.
No supply of dilute products.
Product not suitable.
Insufficient or No air supply.
Air pressure in mixing chamber too
high.
Defect non-return valve for air.
Injektor /mixing chamber blocked
Remedy
Open water supply valve
(See 5.1 - Closing valve).
Clean the filter.
Consult directions for use of dos-
ing unit.
Choose suitable product.
Provide sufficient air supply.
Adjust air pressure setting.
Replace non-return valve for air.
Clean nozzle