Connecting The Device - Atlantic Zanzibar Classique Notice D'utilisation Et D'installation

1
B
A
C

3) Connecting the device

- The device must be supplied with 230V, 50Hz.
- Mains connection must be ensured using a 3-wire cable
(Brown=Phase, Blue=Neutral, Black=Pilot wire), through
a connecting box. In damp premises, such as bathrooms
and kitchens, install the connecting box at least 25cm
from the ground.
- The installation must be equipped with a shutting-off devi-
ce in all poles having a distance of opening of contact of
at least 3mm.
- Ground connection is forbidden.
Do not connect the pilot wire (black) to ground.
- If power cable is damaged or too short, to avoid any danger it must be replaced by a qualified electrician
using special tools.
- If a device pilots or is piloted by a 30mA differential (e.g. bathroom), the pilot wire supply must be pro-
tected on this differential.
4) How to fit the 2 pegs ?
1/Select the locations from the 4 to 6 available, depending on your machine's output.
2/Push the peg into the hole in the channel.
3/Screw tight.
1
Overall
Power (W)
(H) (mm)
600 +1000 1205
750 +1000 1530
900 +1000 1855
2
4
2
Widthr Thickness Measurement
(L) (mm) (mm)
550 153
3
5
Measurement
(A) (B)
1108
1433
503
1758
Note: The pins supplied
with the device are of the
standard type.
In case of a particular
stand, use appropriate
pins.
3
Measurement
(C)
277
262
262