Installation; Preparing The Installation Of The Device - Atlantic F617 Notice D'utilisation Et D'installation

PREPARING THE INSTALLATION OF THE DEVICE

Installation guidelines
- This device was designed to be installed in residential premises. In any
other case, please call your distributor.
- Installation must comply with the standards currently enforced in the
country of use.
- The device must be supplied with 230V single-phase 50Hz.
- In damp areas such as bathrooms and kitchens, you must install the
connection box at least 25cm above the floor.
Keep the device away from any draughts that may interfere
with its operation (e.g.: under a centrally controlled fan, etc...).
Do not install the devise under a fixed socket.
50

Installation

Comply with the minimum distances
from any furniture units when posi-
50
25
tioning the device.
25
Do not install a shelf above vertical
devices.
12
Volume 1 No electrical device
Class II IPX24 electri-
Volume 2 cal device (EN 60335-
2-43 : 2003/A2 : 2008)
13
EN