Function And Application; Transport And Storage; Requirements For Product Use - Festo KSK Notice D'utilisation

KSK
2

Function and application

Connecting shaft type KSK synchronizes the rotary movement of
two parallel arranged electric toothed belt axes.
The connecting shaft has been designed to be mounted in a hori­
zontal position for transferring the rotary movement between axes
DGE-...-ZR, EGC-...-TB or ELGA-TB without additional external load.
3

Transport and storage

• Preferably store the connecting shaft at room temperature
without external mechanical load.
Temperature stress and extreme climatic conditions will damage
the couplings in particular.
4

Requirements for product use

Note
• Make sure that the specifications in this chapter are always observed.
The product will then function correctly and safely.
• Take into consideration the legal regulations applicable for the destination, as well as:
– regulations and standards,
– regulations of the testing organizations and insurers,
– national specifications.
• Compare the limit values specified in these operating instructions with those of your application
(e.g. fitting tolerances, forces, torques, temperatures, masses, speeds, etc.).
Operation of the product in compliance with the relevant safety regulations is contingent on adher­
ence to the load limits.
• Remove all transport packaging, such as foils, caps and cardboard.
The material used in the packaging has been specifically chosen for its recyclability (exception: oil
paper = residual waste).
• Use the product in its original status, without any unauthorised product modifications.
• Take into consideration the ambient conditions at the location of use.
Corrosive elements in the environment (e.g. ozone) will reduce the service life of the product.
• Take the tolerance of the tightening torques into account. Unless otherwise specified, the tolerance
is ±20 %.
18
KSK
Fig. 2
Fig. 3
Festo – KSK – 1503d English