Operating Elements And Connections; Function And Application - Festo EPCO 16 Notice D'utilisation

EPCO
1

Operating elements and connections

EPCO-16
1 2
1
Motor/holding brake connection
2
Piston rod (propulsive tube)
3
Encoder connection
4
Cylinder housing
Fig. 1
2

Function and application

A rotating ball screw converts the rotary movement of a motor into a linear movement. This moves the
piston rod 2 backwards and forwards.
The piston rod is guided in a non-rotating manner. The position of the piston rod can be optionally quer-
ied as follows:
– EPCO-...ST-E: by using an integrated, incremental positional transducer after a homing run
– EPCO-...ST: enables open-loop operation (without positional transducer and without positional
feedback)
– EPCO-...-A: with an integrated ring magnet and optional proximity sensors.
The EPCO electric cylinder is designed for accurately positioning effective loads in combination with the
CMMO-ST or CMMS-ST controller (permissible controllers
The device is intended for use in an industrial environment. Measures may need to be implemented in
residential areas for interference suppression.
18
3 4
EPCO-25/40
5
5
Internal thread for fastening
6
Wrench flats for counter holding
7
Groove for mounting
10 Accessories).
Festo – EPCO-Z6 – 1407b English
6 7 1 3