Function And Application; Transport And Storage - Festo DSMI−25−B Notice D'utilisation

DSMI−...−B
2

Function and application

When the compressed air ports are pressurised alternately, the inner vane in
the housing swivels backwards and forwards. This swivel movement is transmitted
to the outer stop lever and the drive shaft as a rotary movement. The angle of
rotation can be limited by means of adjustable stops and adjustment sleeves for
the stop lever. To use the DSMI as a measuring cylinder, the adjustment sleeve in
the shock absorber retainer can be replaced with cushioning components
(elastomer shock absorbers or shock absorbers).
The pneumatic DSMI swivel module was designed for rotating or swiveling work
loads which do not have to carry out a complete revolution.
The integrated measuring system was designed for monitoring the swivel position
in combination with a positioning controller from Festo (e.g. CMPX, CMAX,
SPC200, SPC11 Soft Stop") or for use as a measuring cylinder.
If it is used as a measuring cylinder, the compressed air will need to be throttled
(e.g. using one−way flow control valves).
The device is intended for use in an industrial environment.
3

Transport and storage

· Take the weight of the DSMI into account:
It weighs up to 7 kg.
· Ensure the following storage conditions:
Storage times should be kept to a minimum
Cool, dry and shaded storage locations protected from corrosion.
Festo DSMI−...−B 1003a English
25