Maintenance And Storage - Lanaform Trimax Guide D'utilisation

MAINTENANCE AND STORAGE

EN
Clean the device before any prolonged period of time during which it will not be used.
Please turn the power supply switch to the off position after each use of the TRI MAX.
CLEANING
• Ensure that the switch is in the stop position and that the plug has been pulled out
before cleaning the device.
• Do not use formaldehyde or organic solvents for cleaning the device, so as to avoid any
change in the leather and any cracks in the plastic.
• In case of stubborn oil stains, clean using a cotton cloth with detergent followed by a
dry cloth for wiping. The cleaning should be done using a clean cloth.
• A damp cloth cannot be used for cleaning the remote control and the area around
the switch. Please use a soft dry cloth.
• Avoid any detergent entering into the ventilation window located in the back.
• Do not wash the unit with a cleaning brush or hard object as you may damage the unit.
• Refrain from disassembling the device to avoid any risk
STORAGE
Unplug the device from the plug socket and let it cool down before storing it in its case
or in a clean dry place, beyond the reach of children. Do not roll the power supply cord
around the unit, as the cable may damage and break.
TROUBLE SHOOTING
Malfunction
Does not work after being switched
on
Stops after a while
Voltage: 220 V—240V/50Hz
Consumption: 60 W
8
Cause
1. The power supply does not work
2. The power supply cable may be
damaged
3. The button does not work
The operating time has expired.
Solution
1. Check if there is any electric
current.
2. Send the device back to the
technical centre
3. Switch to ON/OFF; the device will
work after a "twitch" is heard.
Turn the unit on again