Product Components - Lanaform Trimax Guide D'utilisation

Masquer les pouces Voir aussi pour Trimax:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
TRIMAX
Thank you for choosing the TRIMAX from LANAFORM®. Foot reflexology is a traditional
Chinese method. Aside from the foot, this device can also be used on the calves, thighs,
back and waist. The vibrating massage relieves you from feelings of tiredness and stiff
muscles.
With the TRIMAX, whether at home or in the work place, you will soon appreciate the
benefits of a strong and comfortable massage for maximum well-being and health.
Please read all instructions carefully before using this device.

PRODUCT COMPONENTS

(1) • Vibrating plate
(2) • Infrared light
(3) • Massage points
(4) • Cable
(5) • Remote control
(6) • Support Stand
(7) • Control panel
OPERATION MANUAL
• Place the device on a flat surface and plug it into the electric socket.
• Press the "ON/OFF" button; the device will begin working with the pilot light being
illuminated. The LCD screen displays the value 6; this means that the intensity of the
vibrations is in position 6. The initial setting is in manual mode: vibration speed 6, timer
at 10 minutes and infrared heat treatment at speed 3.
• Press
to increase the rate of the vibration and
pressed, there will be either an increase or decrease in the level. At the same
time, the screen will display the number corresponding to the change in rate. The
control range for the speed goes from 0 to 12, with 0 meaning the massage will end.
• Press "TIME" to select the duration of the operation. Every time you press this you can
move successively through the modes 10 minutes – 15 minutes – 20 minutes and 10
minutes. The initial setting is 10 minutes.
• Press on "INFRARED" to change the thermotherapy. The operation range for the infrared
light varies between H0 and H5, where H0 indicates the absence of heat. The initial
setting is at H3. Each time this is pressed you can successively move through modes
H4-H5-H0-H1-H2-H3-H4. Every time you press "INFRARED", you are able to read the
heat level on the LCD screen. The screen will again display the speed level after a period
of 8 seconds each time it is pressed.
[3]
[2]
[1]
[7]
[4]
to reduce this rate. Every time it is
EN
[6]
[5]
Trimax
3

Publicité

Table des Matières
loading

Table des Matières