Cameo ZENIT P 40 Manuel D'utilisation page 17

Table des Matières

Publicité

AUTO MODE (Programme 1 – Programme 6)
The 6 different auto-programmes each comprise non-editable colour-change sequences. Brightness and speed are independently adjustable. Select
auto mode as described above under CONFIGURE STANDALONE MODE and confirm with ENTER. Now use UP and DOWN to select one of the 6 auto
programmes (observe arrow) and confirm with ENTER. To adjust brightness, use UP and DOWN to select the menu item "Dim" and confirm with
ENTER, then use UP and DOWN to select the desired value between 000 and 255. Confirm with ENTER. Set the run speed by selecting the menu item
"Speed", confirm with ENTER, then select the desired value between 001 and 100. Confirm with ENTER. Press MODE four times to return to the main
display (Mode Auto).
COLOUR MACROS (Color Macro)
15 different preset colour macros are available. Select "Color Macro" as described above under CONFIGURE STANDALONE MODE and confirm with
ENTER. Now use UP and DOWN to select the desired colour preset (observe arrow) and confirm with ENTER (Color Off = blackout). A three-digit
figure is shown on the display and you can set the desired brightness on a scale from 000 to 1000 using UP and DOWN. Confirm with ENTER. Press
MODE three times to return to the main display (Color Macro Mode).
STATIC MODE (Static)
Static mode allows the functions Dimmer, Strobe and R, G, B, W to be adjusted directly on the device with values between 000 and 255, in a similar
way to with a DMX controller. In this way, an individual scene can be created without an additional DMX controller. Select static mode as described
above under CONFIGURE STANDALONE MODE and confirm with ENTER. Now use UP and DOWN to select the menu item you wish to edit (observe
arrow) and confirm with ENTER. The display will show a three-digit number field and you can use UP and DOWN to configure the desired value
between 000 and 255. Confirm with ENTER. Press MODE three times to return to the main display (Static Mode).
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Zenit p 130Clzp40lsdClzp130lsd

Table des Matières