HemoCue Hb 201+ Manuel D'utilisation page 28

for medical equpiment). Furthermore all configurations shall com-
ply with the system standard IEC 60601-1-1. Connections of addi-
tional equipment to the signal input or signal output connections is
deemed to be "configuring a medical system", and therefore
assumes responsibility for the systems compliance within the
requirements of IEC 60601-1-1. If in doubt, contact HemoCue AB.
Warranty
The analyzer carries a 24-month warranty from the day of receipt.
After the warranty period, service/repair is carried out at fixed prices.
Spare parts – Accessories
The following spare parts and accessories are available:
Power adaptor
Battery Lid
HemoCue Cleaners
Hard Carrying Case
Cuvette holder
HemoCue Lancets
+
HemoCue Hb 201 Control Cuvette
Recommended Adapter or equivalent:
Country Type
USA/Canada Mod nr FE3515060D035
Symbols
! Attention, see instructions for use
CE mark
Refers to Type BF Applied Part, Per EN60601-1
Class II equipment
The Medical Equipment with respect to electrical shock, fire
and mechanical hazards only in accordance with UL-2601-1
and related collateral IEC 60601-1 standards for which the
products has been found to comply by UL.
Only valid within the European Community.
Indicates separate collection for waste of electrical
and electronic equipment.
References
1. Makarem, A. In clinical Chemistry: Principles and Technics, 2
Henry, R.J., Cannon, D.C., and Winkelman, J.W., Harper and
Row, Hagerstown, M.D., 1974, pp. 1125 – 1147.
2. Dacie and Lewis, Practical Haematology Ninth edition.
3. Jacques Wallach, M.D., Interpretation of Diagnostic Tests.
Manufacturer Input
FRIWO 120 V AC/60 Hz
28
nd ed.,
Output
6V DC, 350 mA