Intended Use; Belt Sander Safety Warnings - Ryobi Rbs800 Mode D'emploi

ORIGINAL INSTRUCTIONS
EN
Safety, performance, and dependability have been given top
priority in the design of your belt sander.

INTENDED USE

The belt sander is intended to be used only by adults who
have read and understood the instructions and warnings in this
manual, and can be considered responsible for their actions.
The product is intended for sanding metal, wood, plastic, or
similar materials. The product should only be used in well-
ventilated areas.
The product is designed for dry sanding only. Do not use
for wet sanding.
The product is intended for consumer use only.
Do not use the product for any other purpose. Use of the
product for operations different from intended could result in
a hazardous situation.
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.

BELT SANDER SAFETY WARNINGS

■ Hold the power tool by insulated gripping surfaces,
because the sanding surface may contact its own
cord. Cutting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator
an electric shock.
ADDITIONAL SAFETY WARNINGS
■ Clamp workpiece with a clamping device. Unclamped
workpieces can cause severe injury and damage. Do
not hold the material you are sanding by hand.
■ The product will restart automatically if stalled. Switch
off the product immediately if it stalls. Determine why the
product has stalled and rectify it, paying heed to the safety
instructions. If necessary, remove the insertion tool.
■ Do not use sanding paper larger than needed. Extra
paper extending beyond the sanding pad can also cause
serious lacerations.
■ Dust from certain paints, coatings, and materials may
cause irritation or allergic reactions to the respiratory
system. Dust from wood, such as oak, beech, MDF and
others are carcinogenic. Material containing asbestos
should only ever be worked or processed by qualified
specialist operators.
■ Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
■ Ambient temperature range for tool during operation is
between 0 °C and 40 °C.
■ Ambient temperature range for tool storage is between
0 °C and 40 °C.
KNOW YOUR PRODUCT
See page 43.
1. Speed dial
2. Lock-on button
3. Dust chute
4. Sanding belt adjustment knob
5. Belt roller
6. Front handle, insulated gripping surface
7. Main handle, insulated gripping surface
8. On/Off trigger switch
9. Supply cord
10. Sanding belt release lever
11. Dust collection bag
12. Vacuum adaptor
13. Operator's manual
14. Sanding belt 60 grit
15. Sanding belt 100 grit
16. Sanding belt 120 grit
MAINTENANCE
■ The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
serious injury.
■ When servicing, use only original manufacturer's
replacement parts, accessories, and attachments.
Use of any other parts may create a hazard or cause
product damage.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
■ If the power cord is damaged, it must be replaced by
an authorised service center in order to avoid a hazard.
■ Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic which may result in serious personal injury.
■ For greater safety and reliability, all repairs should be
performed by an authorised service centre.
SYMBOLS
Safety alert
Alternating current
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
3