Dometic 10 Série Instructions De Montage Et De Service page 23

RC10.4 70, RC10.4 90
Key to fig. 0, page 10 and fig. a, page 10
Pos.
1
bk
rd
Connecting to a battery
A
NOTICE!
To avoid voltage loss and therefore a drop in performance, the cable
should be kept as short as possible and should not be interrupted if
possible.
For this reason avoid additional switches, plugs or power strips.
➤ Determine the required cross section of the cable in relation to the cable length
according to fig. b, page 11.
Key to fig. b, page 11:
Co-ordinate axis
l
∅
A
NOTICE!
Make sure that the polarity is correct.
• Before starting the device for the first time, check whether the operating voltage
and the battery voltage correspond (see type plate).
➤ Connect the cooling device
– As directly as possible to the pole of the battery or
– To a plug socket which is fused with at least 15 A (at 12 V) or 7.5 A (at 24 V).
A
NOTICE!
Disconnect the cooling device and other power consuming devices
from the battery before connecting the battery to a quick charging
device.
Overvoltage can damage the electronics of the device.
EN
Meaning
fuse 15 A (at 12 V) or 7.5 A (at 24 V)
black
red
Meaning
Cable length
Cable cross section
Setting up and connecting the refrigerator
:
Unit
m
mm²
23