Important Safety Instructions - Meec Tools 010582 Traduction Des Instructions D'origine

Carrying a power tool with your finger on
the switch, or connecting a tool to the
mains supply when the switch is in the ON
position, increases the risk of accidents
and injuries.
• Remove adjuster keys/spanners before
switching on the power tool. Spanners or
the like that are left in a rotating part of
the tool can cause personal injury.
• Do not overreach. Always maintain a firm
footing and good balance. This ensures
better control over the power tool in
unexpected situations.
• Wear suitable clothing. Do not wear
loose-fitting clothing or jewellery.
Keep your hair, clothing and gloves
away from moving parts. Loose-fitting
clothing, jewellery and long hair can
get caught in moving parts.
• If dust extraction and dust collection
equipment is available, this should be
connected and used correctly. The use
of such devices can reduce the risk of
dust-related problems.
USE AND CARE
• Do not force the power tool. Use the
correct power tool for the planned work.
The tool does the job better and safer
when used at the rate for which it was
designed.
• Do not use the tool if it cannot be
switched on and off with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
• Pull out the plug and/or remove the
battery before making any adjustments,
changing accessories or putting the power
tool away. These safety precautions
reduce the risk of accidently starting the
tool.
• Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions, to
use the tool. Power tools are dangerous if
used by inexperienced persons.
• Keep the power tool properly maintained.
Check that moving parts are properly
adjusted and do not jam, and that no
parts are incorrectly fitted or damaged.
Check for other factors that could affect
functionality. If the power tool is
damaged, it must be repaired before
being used again. Many accidents are
caused by poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
• Use the power tool, accessories and bits
etc., in accordance with these instructions,
taking into account the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those they
are intended to be used for.
SERVICE
• The power tool must only be serviced by
qualified personnel using identical spare
parts. This will ensure that the power tool
remains safe to use.

IMPORTANT SAFETY INSTRUCTIONS

• Keep your hands and the rest of your body
away from the chain when the machine is
running. Check that the chain is not
touching the ground or an object when
starting the product. A moment of
inattention or carelessness can result in
serious personal injury.
• Hold the back handle in your right hand
and the front handle in your left hand,
even if you are left-handed. Never hold
the product in any other way – risk of
personal injury.
• Hold the product by the insulated grips
when working in areas where it may come
into contact with concealed electrical
EN
63