Beta C48M Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
INSTRUCTIONS FOR USE
ISTRUZIONI PER L'USO
C48M – MOTORIZED PLATFORM CART
OPERATION MANUAL AND INSTRUCTIONS FOR MOTORIZED PLATFORM CART MANUFACTURED
BY:
BETA UTENSILI S.p.A.
Via A. Volta 18,
20845, Sovico (MB) ITALIA
Original documentation drawn up in ITALIAN.
CAUTION
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
CART. FAILURE TO COMPLY WITH THE SAFETY STANDARDS AND
OPERATING INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.
Store the safety instructions with care and hand them over to the users.
PURPOSE OF USE
The motorized cart can be used for the following purpose:
• Transportation of heavy loads (max. 400 kg) in closed environments, including warehouses, workshops, offices, shops
etc., on flat, smooth, properly hard and hard-wearing floors.
The motorized cart must not be used for the following operations:
• Transportation of people and animals
• Transportation of loads on public roads
WORK AREA SAFETY
Adjust speed according to the amount of space available for operation.
Do not use the cart in environments containing potentially explosive atmospheres, because sparks may be generated
which can ignite the dust or fumes
Keep children and bystanders away from your workplace while using the cart. Distractions from other people can cause
you to lose control over the cart.
ELECTRICAL SAFETY
• For the batteries to be recharged, the cart must be connected to a system fitted with such electrical safety devices as required
under current regulations.
• Do not use any adapters.
• Do not force the batteries open.
• Do not expose the cart to humidity.
PERSONNEL SAFETY
• Stay alert; watch what you are doing. Do not use the cart while tired or under the influence of drugs, alcohol or medication.
• Keep proper balance at all times during use. This will enable better control of the cart in unexpected situations.
• Check that the switch is in the OFF position before connecting it to the power source.
• Do not modify the crat. This can reduce the effectiveness of safety measures and increase operator risk.
• Have the cart repaired through trained staff and only using original replacement parts.
EN
I
7

Publicité

Table des Matières
loading

Table des Matières