Wilo Stratos 1.25x3-20 Notice De Montage Et De Mise En Service page 26

English
LC display
22
Setting
Switch pump on/off.
Switch on pump, "ON" and the "module motor
symbol" appear in the display
Switch off pump, "OFF" appears in the display and
the "motor symbol" disappears.
Menu point
selected
Either flash
auto
Menu point
• the pump is operated at PLR/LON/CAN
• regulator mode was selected,
• the input 0...10 V was activated
Subject to technical alterations!
The setting can be altered by turning
the control button.
Setting stored.
is skipped if regulator mode was
• automatic night setback
Pump runs in standard mode
Menu point
" during autom. control
mode or "auto
automatic night-setback
• normal control mode, automatic
night-setback disabled.
Menu point
any symbol.
call up one of the two settings
and store.
Display jumps to the next menu.
is skipped if:
then shows "auto
" during
does not contain
WILO SE 02/2011