Fitting Instructions - R&G Rgh0001Bk Instructions De Montage

LEGEND
ITEM 1 = HUGGER (HUG0001) (x1).
ITEM 3 = M6 D-SHAPED WASHER (x1).
ITEM 4 = BOOT GUARD SPACER (S0380) (x1).
ITEM 5 = STICKY PADS (x5).
ITEM 6 = M6x20mm LONG BUTTON HEAD BOLTS (x3).
ITEM 7 = M6x25mm O/DIA WASHERS (x2).
ITEM 8 = FLAT SIDED SPACER (S0385) (x1).
ITEM 9 = SPACER (S0386) (x1).
ITEM 10 = CLEARANCE CHECKING BLOCK (x1).
ITEM 11 = ANTI VIBRATION PLATE (SMW0006) (x1).


FITTING INSTRUCTIONS

If a centre stand is fitted, continue with wheel removal as described below. If a centre stand is not fitted,
we recommend fitting by a qualified motorcycle mechanic.

Lift motorcycle onto centre stand.

Remove exhaust mounting bolt from rear pillion footrest in position shown in picture 1.
PICTURE 1

Slacken the exhaust band bolt in position shown in picture 2.

Support the exhaust and gently ease exhaust away from wheel until stopper contacts the frame.

Remove the wheel nuts.

Gently ease wheel out between exhaust and wheel nut studs.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
TOOLS REQUIRED
SET OF METRIC ALLEN KEYS TO INCLUDE 4mm A/F.

19mm SOCKET AND WRENCH.

TORQUE WRENCH (108Nm AND 17Nm).

12mm SOCKET AND WRENCH.

12mm A/F SPANNER.
R&G Racing
www.rg-racing.com
PICTURE 2
Email: info@rg-racing.com