1. Manuels
  2. Marques
  3. R&G Manuels
  4. Accessoires de moto
  5. RAD0387PRO
  6. Instructions de montage

R&G RAD0387PRO Instructions De Montage

Masquer les pouces
1
2
3
4
5
6
7
Les langues disponibles

Les langues disponibles

Table des Matières

Page 1 of 7
RAD0387PRO
FITTING INSTRUCTIONS FOR RAD0387PRO
T
.
HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
S
.
OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
D
.
O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
P
.
LEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS
OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
.
MOUNTING TO THE BIKE
I
,
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
Racing Technique Ltd T/A R&G
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007
www.rg-racing.com
Email:
info@rg-racing.com
Table des Matières
loading

Manuels Connexes pour R&G RAD0387PRO

Sommaire des Matières pour R&G RAD0387PRO

  • Page 1 Page 1 of 7 RAD0387PRO FITTING INSTRUCTIONS FOR RAD0387PRO HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT...

  • Page 2: Tools Required

    Page 2 of 7 RAD0387PRO TOOLS REQUIRED GENERAL TORQUE SETTINGS M4 BOLT = 8Nm SET OF ALLEN KEYS • M5 BOLT = M6 BOLT = M8 BOLT = 20Nm 0 BOLT = 40Nm LEGEND ITEM NO. DESCRIPTION ITEM 1 RADIATOR GUARD (RAD0387)

  • Page 3: Fitting Instructions

    Page 3 of 7 RAD0387PRO FITTING PICTURES Picture 1 Picture 2 FITTING INSTRUCTIONS Firstly, carefully clean the radiator, being careful not to damage any of the fins. • Prepare the radiator guard and clamping plates by inserting 4x rubber bungs (Item 2) in the •...
  • Page 4 Page 4 of 7 RAD0387PRO NOTICE DE MONTAGE POUR RAD0387PRO E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS E PAS PROCEDER AU MONTAGE TANT QUE VOUS N...

  • Page 5: Outils Requis

    Page 5 of 7 RAD0387PRO OUTILS REQUIS VALEURS DE SERRAGE M4 BOULON = 8Nm • CLÉS ALLEN M5 BOULON = 12Nm M6 BOULON = 15Nm M8 BOULON = 20Nm M10 BOULON = 40Nm LÉGENDE ARTICLE NO. DESCRIPTION QTÉ ARTICLE 1...
  • Page 6 Page 6 of 7 RAD0387PRO PHOTOS DE MONTAGE Photo 1 Photo 2 NOTICE DE MONTAGE Commencez par nettoyer soigneusement le radiateur, en veillant à ne pas endommager les ailettes. • Préparez la grille de protection et les plaques de fixation du radiateur en insérant les 4 bouchons en •...

  • Page 7: Politique De Retour De R&G Racing (Articles Non Défectueux)

    Page 7 of 7 RAD0387PRO CONSUMER NOTICE AVIS AUX CONSOMMATEURS La description du catalogue et les échantillons présentés ne constituent que des indications générales sur les Produits. R&G se réserve le droit d'apporter des modifications de conception qui n'altèrent ni leurs performances ni leur aspect esthétique.

Table des Matières