Publicité
ENGLISH – Rolling screen installation and operation manual
PROGRAMMING END STOPS MOTOR SOMFY RTS 230V 50Hz/120V 60Hz (procedures already carried out in factory, SHOULD NOT be performed by unauthorised personnel)
Move the
screen surface
to down limit
switch.
Move the
screen surface
to up limit
switch.
PROGRAMMING END STOPS MOTOR SOMFY IO-homecontrol 230V 50Hz/120V 60Hz (procedures already carried out in factory, SHOULD NOT be performed by unauthorised
ATTENTION! For set up end stop limit you have to change both end stop limits up and down in one enabled procedure of adjustment
Move the
screen surface
intermediate
height.
Move the
screen surface
intermediate
height.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Doc: BASIC Installation Manual rev7 | 25.02.2025
Please verify that you are working with the latest revision of this document before specifying your screen.
1
Press both
and
same time until you will see
a brief up and down motion
of screen surface.
1.
Press both
and
same time until you will see
a brief up and down motion
of screen surface.
1.
Press both
Λ
V
and
to
time until you will see a
brief up and down motion
of screen surface.
1.
Press both
Λ
V
and
to
time until you will see a
brief up and down motion
of screen surface.
Down limit switch
2
Move the screen with
at the
to reach the desired
down limit position.
Up limit swicht
2
Move the screen with
at the
to reach the desired up
limit position.
personnel)
Down limit switch
2.
Move the screen with
at the same
to reach the desired
down limit position.
Up limit swicht
2.
Move the screen with
at the same
to reach the desired up
limit position.
3
4
buttons
Press
button until you
will see a brief up and down
and
motion of screen surface to
memorize the new position
3
4
buttons
Press
button until you
will see a brief up and down
and
motion of screen surface to
memorize the new position
3.
4..
my
buttons
Press
button until you
Λ
will see a brief up and down
V
and
motion of screen surface to
memorize the new position
3.
4.
my
buttons
Press
button until you
Λ
will see a brief up and down
V
and
motion of screen surface to
memorize the new position
Page 11
Publicité
