Gorgy Timing RADIO TIMING CP09 Mode D'emploi page 106

► Auto-Adjust clocks: You can check this box and then indicate the time displayed
currently on the clocks in the fields. Depending on the time zones, the
then automatically determine the time change type and the current time as well as
the number of pulses to send.
► Manual clocks adjust: You can specify the correction yourself. After checking this
box, use the "+" and "-" keys to add or remove minutes.
These settings are confirmed only when you click "Apply changes". If an adjust-
ment is requested, the
"Catching up pulses" or "Waiting for pulses" becomes visible on the same page
and on the LCD screen.
The "Activate 12 hr mode" box allows you to accelerate the catching-up in the case
of clocks with hands. For example, if the clocks show 12:00 hrs and it is 11:00 hrs,
the clocks should make one turn around the dial. To put the clocks forward from
12:00 hrs to 11:00 hrs: 12:01, 12:02, 12:03... 10:57, 10:58, 10:59, 11:00 (by default,
the RTCP09
2 turns around the dial).
NOTE
The pulse output will automatically catch up with the pulses in the event of a
time change or power failure.
106
RTCP09 starts to send pulses (or to wait) and the indication
considers that the output clocks work in "24 hr" mode and carries out
RTCP09 will
MDE-RTCP09-3060V2.2