Gps Input; Detailed Description Of Time Outputs; Afnor Output; Pulse Output - Gorgy Timing RADIO TIMING CP09 Mode D'emploi

F. GPS input
There is no specific setting for this input.

5.6.2. Detailed description of time outputs

A. AFNOR output
You can specify that you want the output to supply an IRIG/B or AFNOR NFS 87500
code.
B. Pulse output
You can set the frequency of output pulses:
► 1 minute: one pulse will be sent every 60 seconds.
► ½ minute: one pulse will be sent every 30 seconds.
You can send additional instructions to correct the time displayed on the connected
clocks. You can either manually enter the number of minutes to catch up, or allow the
RTCP09 to determine this automatically.
These two methods correspond to the following fields: "Auto-Adjust clocks" and "Ma-
nual clocks adjust". You can select any one of these fields, but not both.
MDE-RTCP09-3060V2.2 105